Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Fireplace Services for Long Beach Homeowners
Fireplace services in Long Beach typically cost between $180 for a basic gas fireplace tune-up and $2,800 for a full firebox rebuild or fireplace conversion, with most repairs falling in the $350-$900 range. Emberly Chimney Cleaners Long Beach has completed more than 38,000 chimney and fireplace inspections since 2009, and every fireplace service we perform includes an NFPA 211 Level 2 camera-scan inspection, a written price before any work starts, and a documented photo record under Haven Standard Clause 4. Call us at (424) 401-5585 for a free estimate.
Long Beach’s coastal climate brings specific challenges to fireplace systems. Salt air accelerates damper corrosion in Belmont Shore, the older masonry in Belmont Heights settles and cracks differently than newer construction in Bixby Knolls, and the tight clearances in Naples Island condos demand precise gas fireplace service that doesn’t guess at venting specs. We’ve worked in these neighborhoods enough to know what we’ll find before we arrive, and we name the price in writing before we start.
Our technicians are background-checked, uniformed, and carry license information you can verify. You’ll get a text when your tech is on the way, a camera inspection showing exactly what we found, and a written scope with a written warranty. That’s Haven Standard Clause 1: have it in writing. No exceptions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
What Our Fireplace Services Include
Gas Fireplace Service
Gas fireplace service covers burner inspection, pilot and thermocouple testing, venting verification, and gas pressure readings to NFPA 54 standards. In Long Beach, we regularly find spider webs blocking burner orifices in sealed units that haven’t run since the previous winter, and we find venting compromised by coastal corrosion that a homeowner wouldn’t detect until the CO alarm sounds. We pull the burner, inspect the firebox lining, test every safety shutoff, and document the flame pattern and gas pressure readings in your photo record.
Wood Burning Fireplace
Wood burning fireplace service starts with a Level 2 camera inspection of the flue liner, smoke chamber, and firebox because creosote buildup and hidden masonry damage are the two leading causes of chimney fires in Los Angeles County. Long Beach’s mild winters mean many homeowners burn only occasionally, which actually produces more Class III glazed creosote than frequent burning because the flue never fully warms. We measure liner clearance to combustibles, document any spalling or cracked firebrick, and give you a written condition report with photos before we recommend any repair.
Fireplace Insert
A fireplace insert is a sealed combustion unit fitted into an existing masonry fireplace to improve efficiency and safety, but it’s only as safe as the liner connecting it to the top of the chimney. We find improper liner installations in Long Beach homes weekly: flex liners pulled tight with no support, connections sealed with ordinary foil tape instead of listed high-temp sealant, and inserts set on hearths too shallow for the unit’s clearance requirements. Our insert service includes a full liner camera inspection, proper sizing verification per the manufacturer’s listed instructions, and documentation that your installation meets code.
Damper Repair
The damper is the metal plate that seals your fireplace from the chimney when not in use, and in Long Beach’s salt air, we’ve replaced more rusted-through dampers than we can count, especially in ocean-adjacent neighborhoods like Alamitos Beach and the Peninsula. A failed damper wastes heated air up the chimney, lets downdrafts carry smoke and odors into your home, and in a fire, a stuck-closed damper can force smoke into living spaces. We inspect the damper frame for warping, the plate for corrosion holes, and the control mechanism for smooth operation; when repair isn’t practical, we install a replacement that matches your flue size exactly.
Firebox Repair
The firebox is the actual chamber where combustion happens, built of firebrick and refractory mortar designed to withstand temperatures exceeding 1,800 degrees. We see cracked fireboxes in Long Beach’s 1920s-1950s bungalows regularly, where decades of thermal cycling have shattered the refractory lining and opened gaps that let heat reach combustible framing. Our repair uses HeatShield refractory restoration or full firebrick replacement depending on damage severity, and we document the before condition with camera footage showing exactly where the breach was and how we sealed it.
Fireplace Conversion
Fireplace conversion changes your existing wood-burning fireplace to gas, or occasionally gas to wood where the original construction supports it. Long Beach’s air quality regulations and the convenience of gas make this our most requested major fireplace service in neighborhoods like California Heights and Lakewood Village. We size the gas line, verify the existing flue for proper venting of the new appliance, install a listed gas log set or insert per manufacturer requirements, and pull the permit through the City of Long Beach Building and Safety Division. Every conversion includes a written price before work starts, permit documentation, and the 365-Day Done Right Promise.
Brands We Service for Fireplace Services
We’ve serviced hundreds of Olympia Chimney liner and venting systems in Long Beach and surrounding cities, and we stock their stainless steel flex liners and connector components through Haven’s buying network. Their 316Ti alloy liners hold up particularly well in coastal environments where lesser grades corrode prematurely, and we’ve documented enough installations to know exactly which diameter and length your application requires without guessing.
Famco chimney caps and dampers are another staple in our inventory. We see their stainless steel caps on Long Beach homes from the 1990s that are still serviceable, and we replace their galvanized models that didn’t survive the salt air. Whether you have a Famco top-sealing damper that won’t open fully or need a new cap with integrated spark arrestor for wildfire season compliance, we carry the parts and can show you the difference between repair and replacement on camera before you decide. Whether you have Olympia Chimney, Famco, or any other make, we can help.
Before
AfterSigns You Need Fireplace Services Right Now
- Smoke entering your living space during use. This means your fireplace isn’t drafting properly, and the cause could be a blocked flue, a failed damper, or negative pressure from your HVAC system. In Long Beach’s tightly sealed newer homes, we see this more often than in drafty older construction, and it’s not something to adapt to - it’s a combustion gas exposure risk that needs diagnosis.
- Visible cracks in the firebrick or mortar joints. These gaps allow heat to transfer to combustible wood framing surrounding the firebox, and in a wood-burning fireplace, they can let embers contact hidden structure. We’ve found fireboxes in Belmont Heights with cracks wide enough to see the stud bay behind them, and the homeowners had no idea until our camera inspection.
- Soot or creosote buildup on the fireplace face or mantel. This indicates smoke spillage from an undersized flue, a blocked chimney, or a fireplace opening too large for the flue diameter. It’s also a sign that your fires aren’t burning efficiently, which means you’re getting less heat and creating more combustible deposits in the flue.
- Gas fireplace that won’t stay lit or burns with an orange, lazy flame. A healthy gas flame is blue with minimal yellow tipping. Orange flames indicate incomplete combustion from dirty burners, improper gas pressure, or venting problems that can produce carbon monoxide. We test with a digital manometer and combustion analyzer, not by eye.
- Damper that won’t open fully, won’t close completely, or has visible rust. A stuck damper is a safety issue in both directions: closed when you need to vent smoke, open when you’re paying to heat air that escapes up the chimney. In Long Beach’s coastal climate, we’ve replaced dampers that were more rust hole than metal plate.
Our Fireplace Services Process - Step by Step
- 1
Schedule and confirm. Call (424) 401-5585 and you’ll reach a live person, not a voicemail tree. We book your appointment, text a confirmation with your assigned technician’s name, and send another text when they’re en route to your Long Beach home.
- 2
Arrival and protection. Your technician arrives in a marked vehicle, in uniform, with license information visible. We lay protective coverings from the entry to the fireplace area, inspect the visible hearth and surround for pre-existing conditions, and ask about any symptoms you’ve noticed.
- 3
NFPA 211 Level 2 camera inspection. We run a high-resolution camera up the flue and through the smoke chamber, documenting liner condition, creosote class, mortar joint integrity, and any obstructions or damage. You watch the live feed on a tablet if you’re present, and every image is saved to your documented photo record under Haven Standard Clause 4.
- 4
Written diagnosis and price. Before any repair or service work begins, you receive a written scope with line-item pricing and a written warranty. This is Haven Standard Clause 1: have it in writing. No verbal estimates, no “we’ll see how long it takes” billing. If the inspection reveals no issues requiring service, you pay only the inspection fee.
- 5
Service, documentation, and follow-up. We complete the agreed work, clean the work area, and provide your final documentation: photos of completed work, any readings or test results, the written warranty, and our 365-Day Done Right Promise. If anything isn’t right, we make it right.
How Much Does Fireplace Services Cost in Long Beach?
A typical gas fireplace service in Long Beach runs $180-$320, depending on whether we find component failures requiring replacement. Wood burning fireplace inspection and sweep costs $280-$450 for a standard flue, with additional charges for heavy Class III creosote removal or access challenges like steep roofs in Bluff Park. Fireplace insert service with liner inspection ranges from $350-$650. Damper repair or replacement typically falls between $280-$720 depending on whether we can rebuild the existing frame or need to install a new top-sealing unit. Firebox repair using HeatShield refractory restoration starts around $890, with full firebrick replacement running $1,800-$2,800 for a standard-sized firebox. Fireplace conversion from wood to gas, including gas line work, permit, and insert installation, generally ranges from $2,200-$4,500 depending on the appliance selected and venting configuration.
Several factors move the price within these ranges. Access difficulty matters: a third-story chimney in a Naples Island condo complex costs more to service than a ground-level fireplace in Rancho Estates. The condition of existing components affects whether we repair or replace. And the specific appliance model determines parts availability - we stock common components for brands we service regularly, which keeps labor time and cost down.
To avoid overpaying, get any competitor’s written estimate in hand and bring it to us for a free second opinion. We’ll review their scope against what we found and tell you honestly whether their recommendation matches the actual condition. We’ve saved Long Beach homeowners thousands by identifying unnecessary liner replacements or masonry repairs that our camera inspection showed were not yet needed.
Every free estimate includes the Level 2 camera inspection, written price, and photo documentation. Nothing is recommended without evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (424) 401-5585 for an exact quote - estimates are free.
Fireplace Services Near Long Beach - Our Service Area
We serve Long Beach and the surrounding communities including Lakewood, Bellflower, Carson, Paramount, Seal Beach, Cerritos, Wilmington, Cypress, Norwalk, Downey, and San Pedro. Most Long Beach appointments are available within 3-5 business days, with slightly longer lead times during pre-winter booking surges in October and November. We also handle chimney cleaning and sweep, chimney repair, chimney cap and crown work, and chimney liner installation and full rebuild throughout the same service area.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Fireplace Services in Long Beach
Fireplace service is the inspection, cleaning, adjustment, and repair of your fireplace system to ensure safe, efficient operation. For gas fireplaces, this means burner cleaning, safety control testing, and venting verification; for wood-burning systems, it means creosote removal, firebox and liner inspection, and draft performance assessment. Emberly Chimney Cleaners Long Beach includes an NFPA 211 Level 2 camera inspection with every service, so you see exactly what we found.
A standard gas fireplace service takes 60-90 minutes, while wood-burning fireplace inspection and sweep typically requires 90-120 minutes. Firebox repairs or fireplace conversions can extend to a full day or require a return visit depending on material curing times and permit inspections. We give you a time estimate in writing with your scope, not a vague window. Call (424) 401-5585 to schedule - estimates are free.
Gas fireplace service in Long Beach typically costs $180-$320, wood-burning inspection and sweep runs $280-$450, and major repairs or conversions range from $890-$4,500 depending on scope. We provide a written, line-item price before any work begins under Haven Standard Clause 1, and we offer a free second opinion on any competitor’s written estimate. Call (424) 401-5585 for your specific quote.
We regularly service and stock parts for Olympia Chimney, Famco, Copperfield, and DuraFlex systems, and we work on all major manufacturers including HeatShield, Gelco, and many others. Our technicians carry the manufacturer’s listed installation instructions for verification on site, and we source materials through Haven’s buying network to keep pricing honest. If we don’t stock your specific part, we can typically obtain it within 24-48 hours.
Our live phone support runs 24 hours a day, 7 days a week, and we prioritize calls involving active safety concerns such as gas leaks, suspected carbon monoxide, or chimney fires. For non-emergency service, we schedule appointments during regular hours and keep some flexibility for urgent but non-life-threatening situations. If you smell gas, leave the home and call 911 or your gas utility first, then call us for follow-up inspection and repair.
Every fireplace service is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right. Specific components carry manufacturer warranties ranging from 1 year to lifetime depending on the product - DuraFlex stainless liners, for example, carry a lifetime warranty when properly installed. All warranties are documented in writing at completion under Haven Standard Clause 1, with no exclusions hidden in fine print.
Clear the hearth area of decorations, furniture, and ashes if possible, and ensure we have access to the exterior chimney area if your service includes a full inspection. For gas fireplaces, locate your appliance manual if you have it, though we can identify most units by model number. Don’t light a fire for 24 hours before a scheduled sweep so creosote is cool and safe to handle. We’ll text when your technician is on the way so you don’t need to wait around all day.
Schedule Your Fireplace Services in Long Beach Today
Call Emberly Chimney Cleaners Long Beach at (424) 401-5585 for your free estimate. You’ll speak with a live person 24/7, get a named technician assigned to your appointment, and receive a written price before any work starts. Every service includes our NFPA 211 Level 2 camera inspection, documented photo record, and the 365-Day Done Right Promise. No obligation, no pressure, no surprises.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Long Beach, serving Long Beach and surrounding communities since 2009.