Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cap & Crown in Long Beach: What to Know First
We provide independent Olympia Chimney chimney cap and crown service across Long Beach, from the bungalows near Belmont Shore to the older craftsman homes around the traffic circle. Most Olympia Chimney cap replacements and crown repairs are completed in a single visit after our NFPA 211 Level 2 camera inspection, with a written price delivered before any work starts. You’ll see the photos, you’ll see the number, and you’ll have our 365-Day Done Right Promise in writing.
This page is for homeowners who already have Olympia Chimney components installed and need honest answers about what’s failing, what it costs to fix in Long Beach, and whether the repair can wait. Corrine Halstead and our crew have been inspecting and repairing Olympia Chimney systems here for over a decade. Call (424) 401-5585 for a free estimate.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless multi-flue caps (SC-series): The SC-1318 and SC-1723 models we see in Long Beach develop salt-air corrosion at the welded corner seams faster than inland specs suggest. The Pacific breeze carries chloride that pits the 304 stainless at the lid-to-screen joint, typically at year 6-8 in coastal zip codes versus 12+ inland. We replace with marine-grade 316L or Olympia’s own SC-MG line, whichever fits your flue count and budget, and we photo-document the seam condition before you decide.
- Olympia Chimney galvanized economy caps (GC-series): These show up on 2015-2019 flip renovations from Bixby Knoll to California Heights. The galvanized coating fails at the drip edge first, and once rust reaches the mesh, squirrels pull it apart in about a season. We don’t recommend re-galvanizing; the labor exceeds a quality replacement. We quote Olympia’s aluminum or stainless upgrade, installed with tapcon anchors into sound crown concrete, not just brick.
- Olympia Chimney crown wash failures on pre-1980s Long Beach masonry: The Olympia-recommended crown mix is 1:1:1 Portland, masonry sand, and pea gravel, but on the soft, sand-based mortar common in Bluff Park and Bluff Heights, that mix can be too rigid. We see vertical cracking at the flue interface by year 3-4, not from the crown mix itself but from differential settlement. Our fix is a bonded elastomeric crown coat (we use HeatShield or Gelco CrownCoat depending on crown condition) over a stabilized substrate, not another rigid pour that’ll crack the same way.
- Olympia Chimney wind-driven rain intrusion on multi-flue caps: The SC-series lid overhang is 2 inches standard, which is adequate for normal precipitation but not for the 25+ mph southerlies that hit Long Beach during winter storms. Water sheets under the lid, saturates the flue tile, and accelerates spalling in the smoke chamber. We can fabricate a custom 3-inch overhang with welded drip edge from our Copperfield supply, or step up to Olympia’s extended-lid special order if your flue spacing allows.
- Olympia Chimney flue collar separation on factory-built caps: The slip-fit collar on Olympia’s round caps (RC-series) loosens where the flue tile has slight dimensional variance, common in 1970s-1980s installations from Lakewood Village to Los Altos. Gaps as small as 3/16 inch let enough water in to destroy a crown in two rainy seasons. We don’t caulk-and-hope; we remove the cap, band the flue tile if needed, and reinstall with a properly sized collar or transition piece from our Famco inventory.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, 24/7. We book your NFPA 211 Level 2 inspection with camera scan. You’ll get a text when your tech is en route.
- 2
Inspection and documentation. We run the camera down the flue, photograph the crown from the roof and the ladder, and check cap mesh integrity, collar fit, and fastener condition. You get the photos and a written condition report on the spot.
- 3
Parts decision with options. We stock Olympia Chimney caps in common Long Beach sizes, plus DuraFlex, Gelco, and Famco alternatives when OEM lead time or cost doesn’t make sense. We explain OEM versus aftermarket trade-offs for your specific model, including warranty implications, and we never source from unverified suppliers.
- 4
Written price, written scope, written warranty. Before any tool comes out, you get Haven Standard Clause 1: the price, the exact work, the materials specified by brand and model, and our 365-Day Done Right Promise. The camera doesn’t lie, and neither does the price sheet.
- 5
Repair and real-time photo record. We complete the cap installation or crown repair, then photograph the finished work from the same angles as the “before” shots. This documented record goes into your file under Haven Standard Clause 4, same as we’ve done since 2009.
- 6
Cleanup and follow-up. We haul off the old cap or crown debris. You’ll receive a follow-up call within 48 hours to confirm satisfaction, and your warranty and photo archive stay accessible if you ever need them.
Before
AfterWhat Olympia Chimney Chimney Cap & Crown Costs in Long Beach
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney cap replacement, standard single-flue | $340 - $520 | Flue diameter, height of chimney, stainless vs. aluminum grade |
| Olympia Chimney multi-flue cap replacement (SC-series) | $580 - $890 | Flue count, custom overhang needs, marine-grade 316L upgrade |
| Crown repair with elastomeric coating | $680 - $1,240 | Crown square footage, crack depth, substrate stabilization needed |
| Full crown rebuild (demolition and pour) | $1,800 - $3,200 | Scaffolding access, flue tile replacement, extended curing time |
| Flue collar repair or transition fabrication | $180 - $340 | Custom metalwork, banding requirements |
These are 2024-2025 ranges for the Long Beach market, based on our actual completed jobs from Belmont Heights to North Long Beach. Every estimate is free, every price is written before work starts, and our Free Second Opinion policy applies to any competitor’s written quote you bring us. Call (424) 401-5585 for your exact number.
Why Long Beach Homeowners Call Emberly Chimney Cleaners Long Beach for Olympia Chimney Work
We’ve inspected and repaired more than 38,000 chimney systems since 2009, and a significant share of those in Long Beach run Olympia Chimney components. Corrine Halstead learned the trade in Queens and built this crew specifically around documentation: camera footage, written price, written warranty. No flashlight inspections, no verbal estimates, no surprises.
Our technicians are background-checked, uniformed, and carry license information you can verify. We stock Olympia Chimney, DuraFlex, HeatShield, and Gelco materials through Haven’s buying network, which means we can source the right part without marking up special orders or pushing you toward whatever’s in the van. If your Olympia Chimney cap can be repaired instead of replaced, we’ll show you the photo evidence and quote both options.
The 365-Day Done Right Promise covers every job. If it’s not right, we make it right. That’s stamped on every invoice, not buried in fine print.
FAQs
No, routine maintenance and cap replacement by an independent service provider does not void Olympia Chimney’s limited lifetime warranty on stainless steel caps, provided the work uses compatible parts and proper installation methods. We document our process with photos to protect your warranty position. If you have concerns about a specific claim, bring us your paperwork and we’ll review it during your free estimate.
Most single-flue and standard multi-flue cap replacements are completed in 90 minutes to 2 hours after inspection, assuming the crown and flue tile are sound. Custom fabrication or crown repair adds half a day. We schedule the work only after you’ve approved the written price, and we don’t start until you have the scope in hand.
Yes. We maintain relationships with Olympia Chimney distributors and secondary suppliers through Haven’s buying network, and we can fabricate compatible solutions from Famco or Copperfield when OEM stock is exhausted. We never install a part we can’t warranty, and we’ll tell you upfront if we’re using non-OEM material.
Hairline cracks in a crown are early-stage failure, not an emergency, but they won’t heal themselves. In Long Beach’s salt-air environment, moisture enters those cracks, re-freezes rarely but corrodes the reinforcing mesh and spalls the concrete year-round. We rate crowns in our photo report as Monitor, Repair, or Rebuild, and we’ll show you which category yours falls into. Many Monitor-grade crowns can go one season with improved cap protection; Repair-grade should be addressed before the next rainy period. Call (424) 401-5585 and we’ll put a camera on it.
Not automatically. Cap and crown failures protect the flue from above; liner failure happens from combustion byproducts, moisture, or age from the inside. We inspect both during our Level 2 camera scan. If your liner is sound, we won’t recommend replacement. If it’s compromised, you’ll see the photo evidence and get a separate written price before any liner work is discussed. No bundled scare tactics. Call (424) 401-5585 for a free estimate.
Written by Corrine Halstead, Owner, Emberly Chimney Cleaners Long Beach at Emberly Chimney Cleaners Long Beach, serving Long Beach and nearby areas.